View 2SK1880S_1697475.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

regarding the change of names mentioned in the document, such as hitachi electric and hitachi xx, to renesas technology corp. the semiconductor operations of mitsubishi electric and hitachi were transferred to renesas technology corporation on april 1st 2003. these operations include microcomputer, logic, analog and discrete devices, and memory chips other than drams (flash memory, srams etc.) accordingly, although hitachi, hitachi, ltd., hitachi semiconductors, and other hitachi brand names are mentioned in the document, these names have in fact all been changed to renesas technology corp. thank you for your understanding. except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. renesas technology home page: http://www.renesas.com renesas technology corp. customer support dept. april 1, 2003 to all our customers
cautions keep safety first in your circuit designs! 1. renesas technology corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas technology corporation or a third party. 2. renesas technology corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by renesas technology corporation without notice due to product improvements or other reasons. it is therefore recommended that customers contact renesas technology corporation or an authorized renesas technology corporation product distributor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by renesas technology corporation by various means, including the renesas technology corporation semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. please contact renesas technology corporation or an authorized renesas technology corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corporation is necessary to reprint or reproduce in whole or in part these materials. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a license from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corporation for further details on these materials or the products contained therein.
2sk1880(l), 2sk1880(s) silicon n-channel mos fet ade-208-1331 (z) 1st. edition mar. 2001 application high speed power switching features low on-resistance high speed switching no secondary breakdown suitable for switching regulator outline 1 2 3 1 2 3 4 4 dpak-1 1. gate 2. drain 3. source 4. drain d g s
2sk1880(l), 2sk1880(s) 2 absolute maximum ratings (ta = 25?) item symbol ratings unit drain to source voltage v dss 600 v gate to source voltage v gss ?0 v drain current i d 1.5 a drain peak current i d(pulse) * 1 3.0 a body to drain diode reverse drain current i dr 1.5 a channel dissipation pch* 2 20 w channel temperature tch 150 ? storage temperature tstg ?5 to +150 ? notes 1. pw 10 ?, duty cycle 1 % 2. value at tc = 25 ?
2sk1880(l), 2sk1880(s) 3 electrical characteristics (ta = 25?) item symbol min typ max unit test conditions drain to source breakdown voltage v (br)dss 600 v i d = 10 ma, v gs = 0 gate to source breakdown voltage v (br)gss ?0 v i g = ?00 ?, v ds = 0 gate to source leak current i gss ?0 ? v gs = ?5 v, v ds = 0 zero gate voltage drain current i dss 100 ? v ds = 500 v, v gs = 0 gate to source cutoff voltage v gs(off) 2.0 3.0 v i d = 1 ma, v ds = 10 v static drain to source on state resistance r ds(on) 6.5 8.0 i d = 1 a v gs = 10 v* 1 forward transfer admittance |y fs | 0.85 1.4 s i d = 1 a v ds = 20 v* 1 input capacitance ciss 250 pf v ds = 10 v output capacitance coss 55 pf v gs = 0 reverse transfer capacitance crss 8 pf f = 1 mhz turn-on delay time t d(on) 10 ns i d = 1 a rise time t r 25 ns v gs = 10 v turn-off delay time t d(off) 35 ns r l = 30 fall time t f ?0?s body to drain diode forward voltage v df 0.95 v i f = 1.5 a, v gs = 0 body to drain diode reverse recovery time t rr 350 s i f = 1.5 a, v gs = 0, di f / dt = 100 a / ? note 1. pulse test
2sk1880(l), 2sk1880(s) 4 30 20 10 50 100 150 case temperature tc (?) power vs. temperature derating channel dissipation pch (w) 0 drain current i (a) drain to source voltage v (v) ds d 1 ms pw = 10 ms (1 shot) 100 s m 10 s m operation in this area is limited by r (on) ds maximum safe operation area 0.1 0.3 1 3 10 300 1000 ta = 25? dc operation (tc = 25?) 10 3 1 0.3 0.1 0.03 0.01 typical output characteristics 2.0 1.6 1.2 0.8 0.4 drain current i (a) d gs v = 3.5 v drain to source voltage v (v) ds 10 v 5 v 4.5 v 4 v 10 20 30 40 50 pulse test 0 typical transfer characteristics ds v = 20 v pulse test drain current i ( a ) d 2.0 1.6 1.2 0.8 0.4 2 gate to source voltage v (v) gs tc = 25? ?5? 75? 46810 0
2sk1880(l), 2sk1880(s) 5 pulse test 0 4 gate to source voltage v (v) gs drain to source saturation voltage vs. gate to source voltage drain to source saturation voltage v (on) (v) ds 20 16 12 8 4 i = 1.5 a d 1 a 0.5 a 812 20 16 static drain to source on state resistance vs. drain current static drain to source on state resistance r (on) ( ) ds drain current i (a) d v = 10 v gs w 0.1 0.2 0.5 1 2 5 100 0.05 50 20 10 5 2 1 pulse test static drain to source on state resistance vs. temperature static drain to source on state resistance r (on) ( ) ds w 20 16 12 8 4 i = 1 a d ?0 case temperature tc (?) 0.5 a 0 40 80 120 160 forward transfer admittance vs. drain current forward transfer admittance | yfs | (s) drain current i (a) d tc = ?5? 75? 5 2 1 0.5 0.2 0.1 0.05 25? pulse test v = 20 v ds 0.02 0.05 0.1 0.2 0.5 1 2
2sk1880(l), 2sk1880(s) 6 body to drain diode reverse recovery time reverse recovery time t (ns) reverse drain current i (a) dr di/dt = 100 a/ s v = 0 ta = 25? pulse test 5000 0.1 0.2 0.5 1 2 5 10 gs m rr 2000 1000 500 200 100 50 typical capacitance vs. drain to source voltage capacitance c (pf) 1000 100 10 1 ciss coss crss v = 0 f = 1 mhz gs 0 10 20304050 drain to source voltage v (v) ds dynamic input characteristics 1000 800 600 400 200 drain to source voltage v (v) gate charge qg (nc) gate to source voltage v (v) ds gs 20 16 12 8 4 0 i = 1.5 a d v = 100 v 250 v 400 v dd 0 4 8 121620 v = 100 v 250 v 400 v dd v gs v ds switching characteristics switching time t (ns) drain current i (a) d t (on) t t t (off) 500 200 100 50 20 10 5 0.1 0.2 0.5 1 2 5 10 v = 10 v pw = 2 s duty 1% v 30 v gs dd m = : < = d r f d
2sk1880(l), 2sk1880(s) 7 reverse drain current vs. source to drain voltage 2.0 1.6 1.2 0.8 0.4 reverse drain current i (a) dr sd 0.4 0.8 1.2 1.6 2.0 source to drain voltage v (a) gs pulse test v = 10 v 0 v, ? v 0 10 100 1 m 10 m 100 m 10 0.01 0.03 0.1 0.3 1.0 3 pulse width pw (s) normalized transient thermal impedance s (t) g m m d = 1 0.5 0.2 0.1 0.05 0.02 1 shot pulse tc = 25? 0.01 1 q ch ?c(t) = s(t) ch ?c ch ?c = 6.25? / w. tc = 25? p d = pw t pw t dm g . q q normalized transient thermal impedance vs. pulse width
2sk1880(l), 2sk1880(s) 8 package dimensions hitachi code jedec eiaj mass (reference value) dpak (l)-(1) conforms 0.42 g 6.5 0.5 2.3 0.2 0.55 0.1 1.2 0.3 0.55 0.1 5.5 0.5 1.7 0.5 16.2 0.5 3.1 0.5 5.4 0.5 1.15 0.1 2.29 0.5 2.29 0.5 0.8 0.1 as of january, 2001 unit: mm
2sk1880(l), 2sk1880(s) 9 hitachi code jedec eiaj mass (reference value) dpak (s)-(1),(2) conforms 0.28 g as of january, 2001 unit: mm 6.5 0.5 5.4 0.5 2.3 0.2 0.55 0.1 0 ?0.25 0.55 0.1 1.7 0.5 5.5 0.5 2.5 0.5 1.15 0.1 0.8 0.1 2.29 0.5 2.29 0.5 1.2 max (4.9) (5.3)
2sk1880(l), 2sk1880(s) 10 hitachi code jedec eiaj mass (reference value) dpak (s)-(3) conforms 0.28 g as of january, 2001 unit: mm 6.5 0.5 5.4 0.5 2.3 0.2 0.55 0.1 0 ?0.25 0.55 0.1 1.5 0.5 5.5 0.5 2.5 0.5 1.15 0.1 0.8 0.1 2.29 0.5 2.29 0.5 1.2 max (5.1) (5.1) (0.1) (0.1)
2sk1880(l), 2sk1880(s) 11 cautions 1. hitachi neither warrants nor grants licenses of any rights of hitachi? or any third party? patent, copyright, trademark, or other intellectual property rights for information contained in this document. hitachi bears no responsibility for problems that may arise with third party? rights, including intellectual property rights, in connection with use of the information contained in this document. 2. products and product specifications may be subject to change without notice. confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. hitachi makes every attempt to ensure that its products are of high quality and reliability. however, contact hitachi? sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. design your application so that the product is used within the ranges guaranteed by hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the hitachi product. 5. this product is not designed to be radiation resistant. 6. no one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from hitachi. 7. contact hitachi? sales office for any questions regarding this document or hitachi semiconductor products. hitachi, ltd. semiconductor & integrated circuits. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan tel: tokyo (03) 3270-2111 fax: (03) 3270-5109 copyright ? hitachi, ltd., 2000. all rights reserved. printed in japan. hitachi asia ltd. hitachi tower 16 collyer quay #20-00, singapore 049318 tel : <65>-538-6533/538-8577 fax : <65>-538-6933/538-3877 url : http://www.hitachi.com.sg url northamerica : http://semiconductor.hitachi.com/ europe : http://www.hitachi-eu.com/hel/ecg asia : http://sicapac.hitachi-asia.com japan : http://www.hitachi.co.jp/sicd/indx.htm hitachi asia ltd. (taipei branch office) 4/f, no. 167, tun hwa north road, hung-kuo building, taipei (105), taiwan tel : <886>-(2)-2718-3666 fax : <886>-(2)-2718-8180 telex : 23222 has-tp url : http://www.hitachi.com.tw hitachi asia (hong kong) ltd. group iii (electronic components) 7/f., north tower, world finance centre, harbour city, canton road tsim sha tsui, kowloon, hong kong tel : <852>-(2)-735-9218 fax : <852>-(2)-730-0281 url : http://www.hitachi.com.hk hitachi europe ltd. electronic components group. whitebrook park lower cookham road maidenhead berkshire sl6 8ya, united kingdom tel: <44> (1628) 585000 fax: <44> (1628) 585160 hitachi europe gmbh electronic components group dornacher stra b e 3 d-85622 feldkirchen, munich germany tel: <49> (89) 9 9180-0 fax: <49> (89) 9 29 30 00 hitachi semiconductor (america) inc. 179 east tasman drive, san jose,ca 95134 tel: <1> (408) 433-1990 fax: <1>(408) 433-0223 for further information write to: colophon 2.0

▲Up To Search▲

Price & Availability of 2SK1880S

	To Download 2SK1880S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .